
Bambu Lab has finally built a tool changer. The H3C, announced on Bambu’s blog on Nov 3, parks nine complete print tools and swaps between them instead of purging a single nozzle every time the color changes.
If you’ve ever watched a purge tower grow taller than the part you were printing, you already get the appeal.
What the H3C costs
US prices are before tax, with shipping included. EU prices include tax.
| Bundle | US | EU |
|---|---|---|
| H3C with AMS 3H | $2,499 | €2,499 |
| + Filament Bundle (PLA palette and TPU) | $2,589 | €2,579 |
| Station Bundle, Bambu Station Open | $2,799 | €2,789 |
| Station Bundle, Bambu Station Enclosed | $3,049 | €3,039 |
The specs Bambu Lab published
- Nine tools: each has its own filament path and heater. Bambu says the next tool pre-heats while the current one finishes, and a swap takes under six seconds.
- Build volume: 330 × 320 × 325 mm.
- Heat: 350 °C at every nozzle and an actively heated chamber that reaches 65 °C, which is what you want for ABS, ASA, PC and nylon.
- Speed: up to 1,400 mm/s, with acceleration up to 25,000 mm/s².
- Filament handling: the enclosed AMS 3H holds nine spools with RFID, has two drying slots that run up to 85 °C, and has dedicated TPU inlets. Hang an older AMS off tool 1 and Bambu says you can run up to 24 materials.
What we’d still like to see
Six-second swaps are Bambu’s number, not ours. The real test is a long multi-material job: how much filament does it actually save, how reliable are nine docked tools after a few hundred changes, and how loud is it? Nobody outside Bambu has had long enough with one to say.
We’ve put every published figure, plus who it’s for and who should skip it, in our H3C spec sheet. New to the difference between FDM and resin machines? Start with our 3D printer explainer.