The X1 is xTool's attempt to replace a shelf of single-purpose lasers with one machine. You start with a 55W CO2 laser for cutting, then add fiber, MOPA or UV sources for metal, color and glass as the orders come in. It makes the most sense for small businesses that sell across materials. If you only cut wood and acrylic, the base unit, or something smaller, is enough. We haven't tested it.
- - you sell products in wood, metal and glass and want one machine instead of three
- - you want to start with CO2 and add marking sources as the business grows
- - you need a 615 × 320 mm bed and a conveyor for long stock
- - you only cut and engrave wood, acrylic and leather
- - you need two marking sources running at once (it takes one external source at a time)
- - you're short on space: the main unit is about 1 m wide and weighs 60 kg

xTool launched the X1 on Oct 29. The pitch is simple: buy the CO2 laser you need now, then bolt on fiber, MOPA or UV sources when your customers start asking for engraved tumblers or etched glass, instead of buying a second and third machine.
This is a spec sheet. We haven’t run an X1, so everything here comes from xTool and published launch coverage.
How it’s put together
Every X1 starts with a 55W CO2 laser on a gantry that covers 615 × 320 mm. That’s your cutting tool for plywood, acrylic and leather. Next to it sits a galvo head, which steers the beam with mirrors for much faster marking. If those terms are new, our laser engraver guide explains them.
The key detail is the 20W diode galvo module. The Gadgeteer reports, and xTool’s page confirms, that you need it before any external source will connect. Only one external source runs at a time.
What it costs
xTool’s X1 page starts at $3,399 for the single CO2 version and says you can save up to $500 with launch offers. At launch, xTool listed these US prices:
- Single CO2: $3,399.
- CO2 + diode galvo: $3,999.
- + 30W fiber: $5,799.
- + 5W UV: $6,499.
- + 60W MOPA: $6,679.
When we checked on Nov 12, the page also showed a $3,699 price without saying which configuration it belongs to, so use xTool’s configurator for the current figure. Customers who put down a deposit have until Dec 6 to pay the balance.
Which setup makes sense
- Wood, acrylic and leather only: the single CO2 version. Don’t pay for galvo you won’t use.
- Adding engraved metal goods: CO2 plus diode galvo plus fiber.
- Color marking on stainless: MOPA.
- Glass and delicate plastics: UV.
What we’d check first
Cut depth at speed, real-world galvo engraving times, how long a source swap takes, and fume handling with a 55W tube. The verdict stays open until we’ve tested it.
The X1 runs on xTool Studio, which added X1 support in version 1.10.
Spec sheet
| base_laser | 55W CO2 |
|---|---|
| galvo_add_on | 20W diode galvo (required for external sources) |
| optional_sources | 30W fiber · 60W MOPA · 5W UV (one at a time) |
| co2_work_area | 615 × 320 mm (24.2 × 12.6 in) |
| max_speed (claimed) | 6,000 mm/s galvo · 600 mm/s CO2 |
| processing_height | 150 mm CO2 · up to 140 mm other sources |
| rotary | up to 110 mm diameter (sold separately) |
| conveyor | long stock with extra rails (sold separately) |
| cameras | 8MP overview · 12MP close-up · ranging camera · LiDAR |
| size_weight | 1,000 × 580 × 420 mm · 60 kg |
| price_us | from $3,399 (single CO2) |